电动叉车中使用的电池旨在在单班工作中为车辆供电。能量在充电周期中返回到电池。单个电池组件称为电芯。电池通常由多个串联的电池组成。细胞以化学方式存储能量，并在使用时将其转换为电能。所需的电池数量取决于电压要求（以伏特为单位）。电池容量以安培小时Ah为单位。
叉车使用电池来：

• •动力

• •启动IC发动机卡车

为了保护您的投资，切勿使电池放电超过80％。仅在大量使用后才对电池充电-标准铅酸电池的使用寿命由充放电循环次数决定。

The battery found in electric forklifts is designed to provide power for the vehicle during a single workshift. The energy is returned to the battery during its charge cycle. The individual battery component is called a cell. The battery usually consists of a number of cells connected in series. The cells store energy chemically and change this to electrical energy with use. The number of cells required depends on the voltage requirements (measured in volts). The battery capacity is provided in Ampere hours Ah.
Forklift trucks use electric batteries to:

• • for motive power

• • to start IC engine trucks

In order to protect your investment never discharge the battery more then 80%. Charge the battery only after substantial use - standard lead acid batteries have a life cycle that is determined by the number of charge / discharge cycles.