采用大功率发动机，动力强劲，功率储备充分；液力传动，具有良好的动力性能、微动性能，操作简便活力。悬高安装的空气滤清器，保证吸入的空气洁净，延长发动机寿命，侧面为流线造型的车体结构，宽大的脚踏板，上下车极为方便，上面钢结构的发动机护罩，结实美观，后端平衡重采用全新大圆弧曲面造型，色彩鲜明的分色涂饰，整个外形圆润过渡、无缝贴合，美观大方。
| 型号 model | 单位 | CPCD40 | CPCD45 | CPCD50 | ||
| 额定载荷 load capacity | kg | 4000 | 4500 | 5000 | ||
| 载荷中心距 load center | mm | 500 | ||||
| 最大起升高度 lifting hight | mm | 3000 | ||||
| 自由起升高度 free-lift hight | mm | 150 | ||||
| 货叉(长×宽×高) fork size(l×w×t) | mm | 1070 ×150×55 | ||||
| 门架倾角 Mast obliquity | ° | 6/12 | ||||
| 最小离地间隙 hold under mast | mm | 160 | ||||
| 最小转弯半径 Turning radius | mm | 2760 | 2800 | |||
| 行驶速度(满载/空载) Travel speed(with load/ without load) | Km/h | 9/19/9 | ||||
| 起升速度(满载/空载) Lifting speed (with load/ without load) | mm/s | 410/430 | 380/430 | |||
| 下降速度(满载 /空载) lowering speed(with load/ without load) | mm/s | 380/340 | ||||
| 最大牵引力( 满载) Towing | kN | 22/18 | ||||
| 最大爬坡度(满载) Gradeability | % | 20 | 18 | |||
| 外型尺寸 size | 长 longer | mm | 4170 | 4214 | ||
| 无货叉长 No longer Fork | mm | 3060 | 3104 | |||
| 宽 Width | mm | 1480 | ||||
| 护顶架高 oevrhead guard hight | mm | 2350 | ||||
| 门架不起升时高度 closed mast hight | mm | 2245 | ||||
| 最小直角通道宽度 Min. bracket routeway | mm | 2740 | 2800 | |||
| 轴距 wheel base | mm | 2000 | ||||
| 轮距 前轮/后轮 Wheel distance (front/behind) | mm | 1180/1190 | ||||
| 货叉调整间距 Fork spacing adjustment | mm | 300-1340 | ||||
| 制动距离(空载) Stopping distance (Empty) | mm | ≤6(19Km/h) | ||||
| 轮胎(前/后) Tire(front/Behind) | 300-15-18PR /7.00-12-12PR | |||||
| 发动机 Engine | 型号 model | LR4B3-G88 | ||||
| 型式 type | 四缸直列水冷四冲程 | |||||
| Water-cooled four-stroke inline four-cylinder | ||||||
| 缸径 ×行程 Bore×Trip | mm | 108 ×125 | ||||
| 总排量 Total displacement | cc | 4580 | ||||
| 压缩比 Compression ratio | 17:01 | |||||
| 功率/转速 rate power/speed | Kw/rpm | 57/2200 | ||||
| 最大扭矩/转速 rate torque/speed | Nm/rpm | 285/1300-1500 | ||||
| 前悬距 Suspend distance front | mm | 570 | ||||
| 后悬距 Suspend distance back | mm | 540 | 584 | |||
| 自重 Total weight | kg | 6190 | 6380 | 6700 | ||
粤公网安备 44010602004351号