所有带有桅杆的叉车都可以安装电子货架高度选择器。可以为存储架的各种货架高度编程此选择器。驾驶员将键入所需的架子高度，电梯将停在适当的高度。货架高度选择器还可以通过抬起/降低托盘清除机架梁所需的几英寸来帮助降低或缩回负载。

货架高度选择器的另一种选择是升降高度指示器。它显示了升高前叉时仪表板上的举升高度。当接近适当的提升高度时，警告灯将警告驾驶员。此时，驾驶员必须手动停止电梯。

电子货架水平选择器的优点：

• •缩短工作周期  

• •增加安全系数  

• •减少对负载的损害 

• •减轻驾驶员压力

All lift trucks with a mast can be fitted with an Electronic Shelf Level Selector. This Selector can be programmed for the various shelf levels of the storage rack. Driver would key in the required shelf level and the lift will stop at the proper height. The Shelf Level Selector also assists with the setting down a load or retracting it by lift/lowering a few inches needed for the pallet to clear the rack beam.
An alternative to the Shelf Level Selector is a Lift Height Indicator. It shows the lifting height on the dashboard while the forks are elevated. A warning light will alert the driver when the proper lifting height is approached. At that point the driver has to stop the lift manually.
Advantages of the Electronic Shelf Level Selector:

• • Improve the work cycle time  

• • Increase the safety factor  

• • Reduce damages to the load 

• • Reduce drivers stress