| 型号 | Model | CPD15T | |||
| 额定起重量 | Rated capacity | Q | kg | 1500 | |
| 载荷中心距 | Load center | D | mm | 500 | |
| 轮胎 | Lift height | L(充气)V(实心) | L,V | ||
| 最大起升高度 | Max. lifting height | H | 2000 | ||
| 自由起升高度 | Free lift height | H3 | mm | 130 | |
| 货叉 | Fork arm | mm | 35×100×900 | ||
| 门架倾角 | Tilt Mast | 度deg | 6/12 | ||
| 外型尺寸Dimensions | Length to face of fork | L(长度)Length | mm | 2830 | |
| Overall width | W(宽度)Width | mm | 990 | ||
| Mast lowered height | H1 | mm | 1695 | ||
| Mast extend height | H2 | mm | 3010 | ||
| Overhead guard height | H4(护顶架高度)Overhead guard height | mm | |||
| 最小转弯半径 | Min.outside turning radius | R | mm | 1750 | |
| 前悬距 | Fork overhang | L3 | mm | 400 | |
| 最大速度 | Max.speed | 行驶（满载/空载）Trave(Loaded/Unloaded) | km/h | 13/15 | |
| 满载起升Loaded litting | mm/s | 280 | |||
| 最大爬坡度 | Max.ground clearance | 满载/空载Loaded/Unloaded | % | 15/20 | |
| 自重 | Service weight | kg | 2850 | ||
| 轴距 | Wheel base | L1 | mm | 1200 | |
| 轮距 | Track | W3(前轮)/W4(后轮)Forward/Backward | mm | 810/840 | |
| 最小离地间隙 | Min.ground clearance | H7 | mm | 120 | |
| 轮胎型号 | Type model | 前/后Forward/Backward | 6.50-10-10PR/5.00-8-8PR | ||
| 行驶直流电动机 | Travel D.C.motor | 型号 电压/额定功率Model volt/Rated power | v/kw | XQ-5 45/5 | |
| 起升直流电动机 | Lift D.C.motor | 型号 电压/额定功率Model volt/Rated power | v/kw | XQD-5-1 45/5 | XQD-6.3 45/6.3 |
| 转向直流电动机 | Steeruing D.C.motor | 型号 电压/额定功率Model volt/Rated power | v/kw | XQD-0.55-3 45/0.55 | |
| 蓄电池组 | Storage battery | 型号 电压/安时Model volt/Ah | v/ah | DS4.80 48/480 | |
粤公网安备 44010602004351号